Field King 190571 Lithium-Ion Battery Powered Pump Zero Technology Sprayer 2-Gal White

- No more pumping. Compressor keeps pressure constant at 20 psi for consistent application - 20% time savings. - Premium, commercial grade shut-off with comfortable grip; lock-on feature; and easy-to-clean, in-line filter. - 21-inch poly wand with Viton seals in shut-off for long-term resistance to chemicals. - Pressure release valve allows you to safely remove internal pressure prior to opening the sprayer. - Teardrop-shaped tank adds stability Due to the lower center of gravity and includes built-in nozzle storage and protection. - 4 nozzles included: Brass adjustable, 2 flat fans, and foaming nozzle. Also accepts Tee Jet nozzles. - Limited 1-year with free replacement parts. - Made in the USA with global components.

From the manufacturer

No More Pumping!

What Makes Us King

Ensuring a Tight Seal

Using an internal rechargeable lithium-ion battery to power an electric air compressor pump, this sprayer is ideal for weed prevention and remediation, pest control, fertilizing, and watering. It operates by pressurizing the air above the fluid in the tank, which causes the fluid to be pushed through the hose, to the nozzle, and sprayed out.

Rechargeable pump sprays up to 12 full tanks per charge!

Shut-off includes a nickel-plated brass poppet for strength and precision, which is more durable than plastic components.

The highest quality Viton seals throughout for maximum chemical resistance.

Seals take 5 minutes to replace.

Safely releases pressure before removing the pump - preventing chemicals from spraying on you.

Lockable shut-off to reduce hand fatigue and an easy-to-clean, in-line filtration system. Extra long, heavy duty non-corrosive wand.

Includes an adjustable brass nozzle, 2 flat fans nozzles, and our patented foaming nozzle. Also accepts TeeJet nozzles.

The teardrop-shaped tank adds stability due to the lower center of gravity and includes built-in nozzle storage and protection.

At the end of the hose is a hose nut. Slide it back to expose the hose barb (2 small, white plastic tabs).

Insert dip tube into tank.

Important: Align hose barb with the two notches cut out from the tank. Push down until it stops.

Slide hose nut back into place over the hose barb and hand tighten. Be careful not to cross thread.